What do these Amp settings Mean?

Let’s learn what do these Amp settings Mean. The most accurate or helpful solution is served by Yahoo! Answers.

There are ten answers to this question.

Best solution

What do the "2, 4 and 6 amp" settings mean on my Black and Decker battery charger?

Right now, my husband is charging up our car battery. He noticed that there are three settings on the charger, but wasn't sure what these three settings meant. Can you enlighten us?? thanks!

Answer:

If you have a day or two, use the 2A setting. It's a slower, but better, deeper charge. The 6A setting...

Read more

prairiep... at Yahoo! Answers Mark as irrelevant Undo

Other solutions

What do these amp settings mean? and do?

I have an Autotek Street Machine SX 2100 200 watts and it has there settings: Hi Variable and it goes from 75Hz-750Hz Line Out X-Over and it has three options Hi, Flat, and Low Amplifier X-Over and it has Hi, Flat, and Low as well Low Variable which...

Answer:

I have an Autotek Street Machine SX 2100 200 watts and it has there settings: Hi Variable and it goes...

Read more

Marcus W at Yahoo! Answers Mark as irrelevant Undo

What frequency should i set my amp and headunit to?

I have (1) pioneer deh 3300ub, (4) 6.5in Boss chaos speakers, and (1) dualspb8a amp and subwoofer combo. The pioneer headunit has subwoofer 1 and 2 settings needing 1 to activate 2. subwoofer 1 settings are normal, reverse, off. sub 2 settings are 5...

Answer:

The frequencies determine the low pass cross-over points your amp will play, and your subs will reproduce...

Read more

Joshua at Yahoo! Answers Mark as irrelevant Undo

What should my settings be on my Hifonics Brutus BRZ2100.1D with my 2 12 Kicker L7s?

Help me out. I've blown 2 12 Kicker L7s already and don't really want to do it again. I may have had my gain up too high. I just now started researching what a lot of the settings truly mean. What should I set all my settings to on my Hifonics Brutus...

Answer:

Rule #1 - IGNORE peak/max ratings. They are completely meaningless. Their only purpose is to sound impressive...

Read more

Trenton at Yahoo! Answers Mark as irrelevant Undo

How to tune my amp for 10'' subwoofers?

i have a 3600 watt mono block amp. it has gain, bass boost, subsonic filter, lowpass filter, and phase shift. i was to tune my amp for my 10 inch 1050w 250rms 4 ohm subs. im not sure what to turn all of the settings too in order to get the best quality...

Answer:

I am guessing Soundstorm SSL amp and Infinity or JBL subs? Talk about a little overkill. Wire to 2 ohm...

Read more

Mr. Bizzle at Yahoo! Answers Mark as irrelevant Undo

AMP gain on max with no distortion?

I have a 800 watt amp and 2 10'' subs from MTX they came grouped in the same box as a starter kit with perfect match amp/sub. It came with a picture of where to turn the gain and other settings for best performance but I wanted it louder. So I turned...

Answer:

What brand of head unit do you have? The voltage output of the signal to the amp may be lower than the...

Read more

Johny at Yahoo! Answers Mark as irrelevant Undo

What amp should i buy?

im looking for a bigger amp with lots of settings my amp at the moment is a line 6 spider 3 15 watt and im using a ibanez rg by bigger i mean around 120 watts

Answer:

Vox does good amps. It depends on what sound you're interested in. Go to guitar shops and test some...

Read more

Jack at Yahoo! Answers Mark as irrelevant Undo

I need help in understanding frequency settings on my Energy ESP-12?

I just bought this sub yesterday in perfect condition for $65. Can someone tell me what audio/video low frequency equalization is and where it should be set to? Also, what does the roll-off frequency mean and what should that be set to? Open the link...

Answer:

You need to set this by ear. There is no hard and fast rule here since it relates to your room and the...

Read more

Exact at Yahoo! Answers Mark as irrelevant Undo

Quick question about options on back of amp?

So I recently purchased an Alpine MRP M500 amp and I'm wondering about one of the settings on the back. There's minimal, nominal, 2, 6, and 12 hz. I could be wrong about the numbers, but what does it mean exactly? The sub pushes 500 watts at 2 ohms,...

Answer:

sounds like a base adjustment that's all set to where it sounds best to you head unit vol about 1/3...

Read more

Eric at Yahoo! Answers Mark as irrelevant Undo

How should I set up my amp for these songs on electric guitar?

I am using a Fender guitar amp and I am new to altering its settings, I'm not even entirely sure what half of them mean. There are 5 dials and 2 knobs, the dials are labeled 1-10 ...show more

Answer:

It's up to you to figure it out dude. Learning how to set up your own amp tones is part of being a guitarist...

Read more

Y4EYP4EFPBETATGZZM5VHRMP5I at Yahoo! Answers Mark as irrelevant Undo

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.