Will this amp work?

Let’s learn will this amp work. The most accurate or helpful solution is served by Yahoo! Answers.

There are ten answers to this question.

Best solution

Will this amp work with these box speakers?

Hey guys, I have a pair of 12" subs from radio shack. They are 450 amps max, and 150 rms a piece, with 4 ohms impedance. I'm not looking for an expensive amp, or one that will be the best, just one that will work well, and will give me a good sound. Do any of you think this amp will work? http://www.walmart.com/ip/DP-Audio-250-Watts-x-2-Car-Amplifier-DA500.2/12347332 or http://www.walmart.com/ip/DP-Audio-500-Watts-x-2-Car-Amplifier-DA1000.2/12347326 with this wire installation kit http://www...

Answer:

First thing you need to know is how you plan on wiring them (and therefore how powerful of an amp you...

Read more

Kevin at Yahoo! Answers Mark as irrelevant Undo

Other solutions

Will my sub and amp work in my 09 corolla?

Basically, I bought an 09 corolla, and the stock stereo sucks. Obviously. The rear speakers are 20 watts each, my old car with stock was 35watts. I placed 250 watt alpines in the front and back of my accord, with an alpine deck (CDA something), then...

Answer:

you should be fine with what you have

Read more

Mashu at Yahoo! Answers Mark as irrelevant Undo

Car audio (help me with my car amp)will this work?

i got a boss audio blx5000 and two pioneer ts-w3002spl subwoofers in a 12 inch dual sealed box in my 99 grand am gt. i melted the power wires 4 gauge to my amp i will up grade soon to 2 gauge 3/8 inch copper wire. my amp draws 175 to 250 amps and puts...

Answer:

you need to upgrade to AT LEAST 1/0 gauge wire. Also those subs are garbage. The reason they sound that...

Read more

RANDY JR 87 at Yahoo! Answers Mark as irrelevant Undo

Will this amp work with theses speakers or is it too powerful?

I'm planning on buying two of these speakers http://www.hifi-tower.co.uk/Skytec-DJ-PA… and I've been researching about buying an amplifier, and people say you should have a more powerful amp so that it comes out clean and the amp isn't under too...

Answer:

That company is playing silly buggers when stating their amplifiers' power ratings. They are, to say...

Read more

Will at Yahoo! Answers Mark as irrelevant Undo

NEED HELP WITH HOW THIS AMP AND SPEAKERS WILL WORK?

ok now im getting a system soon... I have to get TWO 10's cause of speaker space but i want the hardest deepest hitting ones possible... I have found TWO Pioneer Premier TS-W2502D2 2 ohm, or the ALPINE SWR-1023D 2 ohm also... I dont know which to get...

Answer:

If you wire two 2ohm subs in parallel you'll end up with about a 1ohm load on the amp. If so, make sure...

Read more

Justin at Yahoo! Answers Mark as irrelevant Undo

Will this multi amp / LOC setup work?

hi, i need to amp my rear speakers, and im also considering buying a sub off craigslist (that comes with an amp). i just wanted to ask someone who knew what they were doing what would be better. im using my stock headunit, so i bought a LOC to be able...

Answer:

either way is fine technically ... except you arent using 2 channels of the 4 channel amp in the second...

Read more

Yahoo! Answers Mark as irrelevant Undo

Will JL audio w3 subs work with this amp?

I am in the process of installing and buying the parts for a sound system. I know I want decent bass, and sound and all on a 300 dollar budget. I really want to get the "JL AUDIO 10W3v3-4 10" 1000W W3v3 SUB WOOFER" (They will be in a ported...

Answer:

They will work, but not to their full potential. JL Audio runs their equipment at 3 ohms, they try to...

Read more

Yahoo! Answers Mark as irrelevant Undo

I Please need advice on my Amp to power my new stereo (and if it will also work w/my subs)?

I had a Sony Xplod CD player (CDX-GT320) installed in my car (95 Diamante) last year-Circuit City installed the stereo but said since my factory amp was bad (it was), I wouldn’t get any sound until I bought a new amp. I found out (after they closed...

Answer:

I have always used 2 amps.One for my front and rear speakers(a 4 channel amp) and one for my subs(2...

Read more

West Elm Girl at Yahoo! Answers Mark as irrelevant Undo

Will a 300 watt amp wiring kit work for an 800 watt amp?

I bought a wiring kit to wire my sub and amp in my car, I stupidly misread where it said 800 watts on the amp as 300 watts so I bought a 300 watt amp wiring kit, will this work or should I return it and get a kit that is for 800 watt amps

Answer:

return it...... always get proper wiring.

Read more

stsdude2 at Yahoo! Answers Mark as irrelevant Undo

If I connect a Hi/Low Adapter to my factory stereo will my factory amp still work?

So I want to connect a aftermarket amp & subwoofer. I was thinking of buying a Hi/Low Adapter so I can connect the RCA's from my new amp to my factory stereo which has a factory amp to all the speakers but I was wondering if I do that will my factory...

Answer:

you'll be fine, just dont mess with any of the factory amplifier settings. just splice the hi/low converter...

Read more

a.n. at Yahoo! Answers Mark as irrelevant Undo

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.