Will this amp work?

NEED HELP WITH HOW THIS AMP AND SPEAKERS WILL WORK?

• ok now im getting a system soon... I have to get TWO 10's cause of speaker space but i want the hardest deepest hitting ones possible... I have found TWO Pioneer Premier TS-W2502D2 2 ohm, or the ALPINE SWR-1023D 2 ohm also... I dont know which to get the price is close and the pioneer RMS is 800 peak is 3000, the alpine is 600RMS an 1800 peak wattage... So getting two of whichever of these i choose, would i need to get a amp thats RMS @ 2ohm 1000watts x 1 channel i believe its a mono amp and bridge it? i wont be hooking it up i will have a pro do it but i need to get an idea of cheapest amp... Should a Hifonics HFi1500D 1500W RMS, Class D Monoblock HFi Series Amplifier (HFi 1500D) Amplifier work for either one of these 10's? im leaning towards the pioneer this amp does RMS power at 2 ohm 1000watts And it is a 2 ohm sub and amp i need right? or should i get 2 ohm subs and a 2 channel amp? please help me out if my idea will work!! Thanks

• Answer:

  If you wire two 2ohm subs in parallel you'll end up with about a 1ohm load on the amp. If so, make sure the amp you purchase can handle a 1ohm load. On the other hand, if you wire the subs in series you'll end up with a 4ohm load on the amp. When amp shopping, keep in mind that an amp's output at 4ohms will be less than the same amp's output at 2ohms. If you want to wire the subs for 2ohm operation, I might suggest using a stereo amp that can handle 2ohm loads on both channels. Also, if you purchase an amp that has an RMS rating that is greater than the rating of the subs, you'll have to keep the gain on the amp trimmed down or you'll risk blowing the speakers sooner than later. Have fun!