What Is Drilling?

Let’s learn what Is Drilling. The most accurate or helpful solution is served by Yahoo! Answers.

There are ten answers to this question.

Best solution

Answer:

Drilling is a plunge cut only, with the tool rotating, the work is stationary. Milling can combine that...

Read more

frogsplash at Yahoo! Answers Mark as irrelevant Undo

Other solutions

1) What are the main steps in land surveying and drilling? 2) What is the overall cost of surveying? 3) Cost of drilling? 4) What is the success rate of drilling?

In other words, what are the steps needed for a successful drilling (finding oil/gas), and how much does it cost per successful drill?  (I would really appreciate the breakdown of how this is calculated).

Answer:

Surveying and drilling costs are going to vary a lot from well to well and tract to tract.  Surveying...

Read more

Josh Stein at Quora Mark as irrelevant Undo

What can I do to legally stop exploratory natural gas drilling within 1000 feet of my neighborhood?

What can I do to legally stop exploratory natural gas drilling within 1000 feet of my neighborhood? There is a local activism group, FRERC. However, they seem to be focusing on slowing the drilling down and asking the company to adhere to EPA standards...

Answer:

I'm a planner by profession, albeit in Canada. I'll just say right off that I give this advice thinking...

Read more

TauLepton at Ask.Metafilter.Com Mark as irrelevant Undo

What is a drilling engineering?

Hello everyone, please please read this and answer my questions because it is going to be my life time decision. I met this super nice guy on a matrimonial website. says he is a Drilling Engineer,widowed, with 5 yr old girl. I am a very well settled...

Answer:

Dump the DE -he's a promoter and not real trustworthy.

Read more

Arya at Yahoo! Answers Mark as irrelevant Undo

What type of drilling fluid is mainly used in drilling?

What i am asking is for onshore and offshore is it a synthetic or water based. Also for each job what drilling fluid is used? I would also appreciate it if you do find it online to ...show more

Answer:

Most drilling is done with a water clay mixture to which other additives can be mixed depending on the...

Read more

S72OQHXYXAYI7YETZ3QE72VTHE at Yahoo! Answers Mark as irrelevant Undo

What restrictions were/are in place for near-shore oil drilling in the United States?

During and after the BP oil spill this past spring/summer, I have heard complaints from different coworkers and acquaintances to the effect of: "the EPA wouldn't allow drilling near the shore, so they forced the oil companies into drilling within...

Answer:

In the U.S., extraction of oil and gas is generally regulated by the individual states through statutes...

Read more

Ubi at Yahoo! Answers Mark as irrelevant Undo

What are some web resources for an introduction to oil well drilling?

Given someone with a college-level background in math and physics, are there online books or other resources that could give a thorough introduction to oil well drilling? This would cover such basics as for instance calculating bottom hole pressure and...

Answer:

http://www.rigzone.com/training http://www.osha.gov/SLTC/etools/... http://en.wikipedia.org/wiki/Lis...

Read more

Jackson Rogers at Quora Mark as irrelevant Undo

What are some cook jobs (contract jobs ) in the arctic of canada, oil drilling?

there was a cook working with me a year back , that use to work up in the arctic on a drilling site as a cook on a 6 months contract ,, being paid large money, I forgot to ask what was or are the names of the companies... did anybody ever hear about...

Answer:

For summer work as a cook try the Forest Service , for oil rig camp, check catering companys online...

Read more

Lllll Lllll at Yahoo! Answers Mark as irrelevant Undo

What is the best tool to use for drilling a hole in a bullet casing?

Before you give me a lecture on safety, let me assure you that the bullet has been fired, and there is no powder or primer left in it. I work with shells a lot, but I've never needed to drill into a casing before, and I'm not sure exactly what to use...

Answer:

rede has it right,,, the shell needs to be stabilized,, also you will need to go slow as the drill bit...

Read more

Call me Captain at Yahoo! Answers Mark as irrelevant Undo

What are the laws for Offshore Drilling?

Hey guys. So I'm doing this project for school on offshore drilling. I need information on 1)how the u.s. gets their oil (who do they get it from?) 2. What are the laws on offshore drilling for the U.S ( are certain states allowed to decide weither they...

Answer:

Outside the 3 mile line..NONE...it is not in the US then..

Read more

system-l... at Yahoo! Answers Mark as irrelevant Undo

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.