Help with dodge neon brakes?

Let’s learn help with dodge neon brakes. The most accurate or helpful solution is served by Yahoo! Answers.

There are ten answers to this question.

Best solution

I really need help with my neon dodge it's jerking when I step on the brakes , please help some one?

some times it jerk real hard when I step on brakes at the light, it's hard to climb hills ,

Answer:

you need to have someone check it, that could be the transmission causing that to happen, they got a...

Read more

tomitafl... at Yahoo! Answers Mark as irrelevant Undo

Other solutions

I have a dodge neon 02 sxt and my brakes make loud screeching sounds! Help?

i was wondering if there was a way for me to fix this myself rather than take it to a mechanic.

Answer:

NOT TO SOUND DISRESPECTFUL BUT IF YOU HAVE NO EXPERIENCE THEN DON'T TRY THIS FOR YOUR SAFETY AS WELL...

Read more

GFHKGIPLKKWKP3XTAOQWBT7XHA at Yahoo! Answers Mark as irrelevant Undo

Problem with '97 Dodge neon brakes! Please help!?

I have a strange problem with my passenger-side brake. On really hot, humid days, when the temperature is 75 or above usually, the passenger side brake seems to stick to the brake ...show more

Answer:

Your caliper piston or slides could be sticking, in rare case, the hose at the caliper may be broken...

Read more

7C3T3WKXGOY5HI4L37EKYT7NOE at Yahoo! Answers Mark as irrelevant Undo

Almost no braking power after changing brake pads and bleeding the brakes 95 dodge neon non abs?

I recently changed my brake pads on a 95 dodge neon after they were changed out I took it for a test drive, the front driver side wheel started to smoke and smelled awful. I assumed it was a seized caliper so i replaced it from autozone with a new one...

Answer:

First yes the pedal will get hard if the engine is off. The brake booster needs vacuum to work correctly...

Read more

Wes at Yahoo! Answers Mark as irrelevant Undo

97 dodge neon brake problem , brakes stay on...?

I have a 1997 dodge neon highline sohc , it seems like the front brakes are always on , i took the wheel off and i cant turn the rotors at all , if i am rolling slow and put it in nuetral the car will stop , i pushed the piston it and the rotors turn...

Answer:

you,ll probably have to either replace the master cylinder or the calipers or find out whats causing...

Read more

Benjammin R at Yahoo! Answers Mark as irrelevant Undo

Can You Help Me Tune up My Dodge Neon?

hello friends, i have a 2004 dodge neon, and right now it's stock....what i want to do is, turn this car into a project...it is the car i use to drive to work and everything, but i want to hook it up. i want to install a body kit, AIR cool intake, headers...

Answer:

Pretty much for every part that you are going to want for your car just google it. For an 03-05 Neon...

Read more

nathan at Yahoo! Answers Mark as irrelevant Undo

Have a problem with a 2000 dodge neon help plz?

i have a 2000 dodge neon need help plz i have had this car for about a yea got bout 97 mi on it its a good car my car wont start at all when i turn the key i can just hear my fuse box click like when my car is like in a wrong gear and tryin to start...

Answer:

you probably need a new stop light switch. located by the brake pedal? it might just need adjustment...

Read more

Los at Yahoo! Answers Mark as irrelevant Undo

Drum brakes maintenance help?

I have an 05 dodge neon and have to replace the drum brakes in a couple months. I just replaced the front rotor brakes with new rotors and ceramic pads. I would like to put ceramic pads on the rear as well, but i dont know anything about drum brakes...

Answer:

Drum brakes are a completely different animal than disc brakes. They operate differently first of all...

Read more

Cdub at Yahoo! Answers Mark as irrelevant Undo

How do you replace control arm bushings on a 2000 dodge neon?

I have a 2000 Dodge Neon ES 5 Speed. At 65 and over miles per hour my car's steering wheel shakes rapidly usually when I go over just a little bump. I got an alignment done at Les Schwab and it still didn't help. I took it to Midas and they said the...

Answer:

You'd remove the lower control arm and I assume you have a press. You simply press the old bushings...

Read more

Wonderfu... at Yahoo! Answers Mark as irrelevant Undo

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.