What is 5.1 channel input?

Let’s learn what is 5.1 channel input. The most accurate or helpful solution is served by Yahoo! Answers.

There are ten answers to this question.

Best solution

Channel 51 KNWS in Houston,TX (Channel 2 where I am). What kind of channel are they?

They show nothing but infomercials all day then for few hours they show reruns of the Cosby , A Different World & a few other sitcoms then back to infomercials. Why don't they just re name it a hope mshopping channel & they don't even have a...

Answer:

They are not an actual channel. They dont even have a digital signal.You can only watch it on cable

Read more

Senator Padme Amidala Skywalker at Yahoo! Answers Mark as irrelevant Undo

Other solutions

Question for digital TV techs: I would like to inject a source as an input channel between set top box/aerial?

Here is the scenario. My location: Australia I am running an LG 5100P HD set top box to receive free-to-air digital channels. The set top box is connected directly to a Samsung LCD 22" monitor via the set top box's DVI output. Audio is supplied...

Answer:

The best solution I can see is to get a AV receiver. This will allow you to add other inputs and use...

Read more

L at Yahoo! Answers Mark as irrelevant Undo

I have a tv with red white and yellow input ports, but no input channel. How do I make my PS2 work on it?

There is no input channel. If I press the 'menu' button, I have the option of activating a VCR channel (which I enabled for 03) or a cable channel (which I also tried for channel 03). Neither worked. My tv is an older RCA tv.

Answer:

Make sure your game console is turned on when checking these out. Check to see if your VCR channel also...

Read more

C at Yahoo! Answers Mark as irrelevant Undo

This Zenith TV has plugs but no INPUT channel?

I am in this motel 5 days a week. My first night here I plug in my Xbox 360 jam a few buttons that I couldn't read on the TV and it worked. Now I am trying to switch the tv to that channel that worked before but won't work now. It has 3 plugs in the...

Answer:

SIMPLE....call the hotel operator and ask them to send up the guy that knows how to get the VIDEO INPUTS...

Read more

paulman4... at Yahoo! Answers Mark as irrelevant Undo

Can i get HD channel with s video input?

I just got a hitachi 55HDT79. Its all of that 1080i, 720P, 480i ready etc. Currently its only connected to dishetwork reciever 508 via S video and my local cable with RF input. Recently a local channel started airing their news in HDTV format and they...

Answer:

answered on another portion of this same forum: You have an HD TV. But, you also need an HD receiver...

Read more

raheel98... at Yahoo! Answers Mark as irrelevant Undo

Need help getting to the input channel with my universal remote.?

Ok, so my original tv remote broke, so i went and got a universal remote. Its made by RCA model number: RCU410BL. It works fine with my TV and all, the only problem i have is that i have my xbox 360 pluged up to the front of the TV in the A/V slots....

Answer:

you'll have to try the other codes from your remotes manual. sometimes all the codes can work, but only...

Read more

Matt at Yahoo! Answers Mark as irrelevant Undo

Tv input channel problems?

I have a minsubishi 70 tv that is relatively old. I hooked it up to dish network, the problem is i can only view "TV2" on it and thats on channel 116. I checked on the system info and it said that TV1 was set for channel 3 and TV2 is set for...

Answer:

Hey Andrew! It sounds like it is related to the Modulator Setup. Each TV is different and will work...

Read more

Thomas Faust at Yahoo! Answers Mark as irrelevant Undo

How do i use regular speaker wire as an input for a four channel amp?

I have speaker wire running from the back of my head unit to a three way ON-OFF-ON switch. The other input for the switch comes from my cb radio's PA output. The output from the switch runs to two outdoor powerhorn speakers in the front of my truck....

Answer:

They way you described should work, but you can also look at grabbing a high level to low level adapter...

Read more

zcardoza... at Yahoo! Answers Mark as irrelevant Undo

How can I use the control pin of an RC receiver's channel to be a Boolean input?

The control of the receiver's channel uses PWM, can I convert that to be a Boolean input so when the throttle is moved it can cause a 5V input, or would using the other pins of the channel work better?

Answer:

The other pins of the channel are the positive and negative supply for a servo, so you won't get a useful...

Read more

bcdas at Yahoo! Answers Mark as irrelevant Undo

How can I use an RC receiver channel to be a Boolean input?

The control of the receiver's channel uses PWM, can I convert that to be a Boolean input so when the throttle is moved it can cause a 5V input, or would using the other pins of the channel work better?

Answer:

Check Google

Read more

bcdas at Yahoo! Answers Mark as irrelevant Undo

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.