What is cross section plan?

Also known as Dom St. Peter. Is there a website where I can find pictures or illustrations of these?

I know its probably something like an I beam, but different I beams have different second moment of areas per cross sectional area, so has it been established what the ratio of side lengths are of the cross section with the greatest second moment of...

Hello all I was wondering if anyone could help me with the following:- I have a beam that is fixed at one end but unsupported at the other. If i apply a load on the unsupported end the beam bends. What i would like to know is this:- When no load is applied...

Part A: Find the coordinates of the focus and the equation of the directrix. Explain your answers. Part B: Write an equation for the cross section of the satellite dish. Explain your answers. Part C: If the satellite dish is 4 feet deep, find the diameter...

You want to cross a straight section of a river that has a uniform current of 5.40 m/s and is 126. m wide. Your motorboat has an engine that can generate a speed of 17.0 m/s for your boat. Assume that you reach top speed right away (that is, neglect...

Help me find cross section posters and books. I am looking for books and posters which display exploded cross sections of various technologies (airplanes, spacecraft, machines). For reference, I am a fan of Stephen Biesty's books, so anything in that...

I have to do a piece of art coursework, its A2 sheet filled with a montage of 'cross section images' uhmm problem is i don't have a clue what i'm supposed to do! I know if you cut an orange in half and do the middle that's a cross section, but does anyone...

for example i know that the rsquared values for cross section data that are lower are considered just as good a higher times series values. e,g is 0.56r^2 for cross section data just as good as 0.96r^2 for time series? cheers

I know the cross section formula is Rate = sigma * I * N where sigma is the cross section, I is the current N is the number of target nuclei per unit area I have a target of Li-7 that is 100microns thick and a beam of diameter 1cm hits it. How do I calculate...