How to clean the tile and grout?

Wall tile white grout gone yellow after using tile cleaner, how do you get it white again?

  • Hi after grouting wall tiles using white grout, i used clean 'n'easy tr50 trade strength brick, tile & paver cleaner to clean the tiles, and after 24 hours ive come back to the job and the grout had turned yellow. how do i get it back to white? thanks.

  • Answer:

    You can try bleaching it, or using a bathroom cleanser with bleach in it. Bleach kills bacteria which can sometimes cause discoloration, and removes most stains.

lek worry no more211 at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

A small amount of bleach normally does the job but don't do it too often as it can sometimes make it worse. You can use multi-surface cleaners, or grout cleaners even. Once you have managed to get the colour back to its original shade as much as possible, make sure you seal it and also spray an anti-mould agent so that any dampness doesn't trigger discolouration or cause mould. Good luck!

Zaina

Get yourself a nail brush and some bleach and rub it into the grout for 10 minutes or so and then wash off... if you don't want to use bleach then try some powerful bathroom cleaning products which should do the trick. I've used an old toothbrush before as well with some bleach..

Top Furniture Ltd

Had the same problem when I was cleaning out my rental house, used EcoGeeks products and worked like a charm!

Emily

Sorry

with bleach

Nero

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.