What gauge for speaker wire??

Let’s learn what gauge for speaker wire. The most accurate or helpful solution is served by Home Improvement.

There are ten answers to this question.

Best solution

What gauge speaker wire do I need?

I am looking to run some speaker cable through my unfinished basement. I will need 35 ft long cables for a couple of Technics SB-A10 speakers. What gauge of cable will I need? How is the gauge calculated? How much noise should I expect with a 35 ft long cable? Impedance: 8 ohm Input power: 200 W Crossover frequency: 3000 Hz–6000 Hz Output sound pressure level: 91 dB/W (at/a 1 m) Woofer cone type: 25 cm (10") Midrange cone type, ferrofluid: 10 cm (4") Tweeter, cone type, ferrofluid...

Answer:

The most important aspect of speaker wire is resistance. There is a ton of junk-science and stupid audiophile...

Read more

Kevin at Home Improvement Mark as irrelevant Undo

Other solutions

Hi. What gauge of speaker wire is recommended for surround speakers?

I'm setting up my receiver and speakers. I need about 25 feet of wire for each surround speaker. They are about 7"X 5"X 4". What gauge of wire should I get? What gauge should I use for the 2 Front and 1 Center Speakers? Is the gauge and...

Answer:

Just finished wiring my 7.1 for my theatre with 12 gauge.. They are the most value for the money.. go...

Read more

ricky759... at Yahoo! Answers Mark as irrelevant Undo

What gauge of wire to use on a home speaker?

The wire inside my home speaker box looks like it's 18 gauge,so will using 12 gauge wire from the receiver to the speaker matter? THX.

Answer:

This is a good question. Most speaker manufacturers use smaller gauge wire for the wiring inside the...

Read more

WE2D7Q3B5WIXLFUIIOIR3GW2YU at Yahoo! Answers Mark as irrelevant Undo

What gauge speaker wire should I use for my home audio setup?

I have a Sony STR-DB940 home audio/video receiver, (2) Cerwin Vega E-712 model tower speakers, a Cerwin Vega LW-10 powered sub, (2) Cerwin Vega E-705 bookshelf speakers, and a Cerwin Vega E-75C center channel speaker. I have the subwoofer connected using...

Answer:

I work at a best buy and this is what i tell customers. When you're dealing with wiring speaker systems...

Read more

Devaughn M at Yahoo! Answers Mark as irrelevant Undo

What gauge speaker wire should I use?

I am running 50 feet of speaker wire (each speaker) from my amp inside my house out through the wall to outdoor speakers underneath my patio. The speakers are 100W and the amp is a surround sound rated at 75W per channel. Would 16 gauge be sufficient...

Answer:

I recommend 16ga up to 80ft, then use 14 gauge. This is the method we use when we handle our installations...

Read more

dotnetwa... at Yahoo! Answers Mark as irrelevant Undo

What gauge speaker wire/cable should I use?

I need to run a speaker wire about 33' to 36'. Will there be any audible difference if I use a 16 gauge vs. an 18 gauge wire (including dB, fuzz, etc.) I know the 16 is better, but I need to save $$$.

Answer:

Well, if the speakers need 16 and you run 18.. you have a risk of the 18's melting and possibly catching...

Read more

rytymu at Yahoo! Answers Mark as irrelevant Undo

What is the best wire speaker gauge for 50 feet insttallation ? read more ....?

The setup : 5.1 surround speakers system. 2 front speakers around 20 feet, surround speakers around 50 feet in length. Power 150 watts for each channel. What is the best and economical speaker wire gauge i should use ? is 16 gauge good enough ? thanks...

Answer:

I would go with 14 or 12 gauge.

Read more

Question... at Yahoo! Answers Mark as irrelevant Undo

How do you tell what gauge a speaker wire is?

I have speaker wire that is covered by a grey coat and within that there are 4 wires; red, black, white, and green. How do i know what gauge the wire is?

Answer:

Unless you can judge it by eye, you have to have that information printed on the gray coat. There may...

Read more

34GIYYY6OCL3VN2V3NBSXXYYNM at Yahoo! Answers Mark as irrelevant Undo

What speaker gauge wire to use and what rca cables?

what gauge speaker wire i should use for 1000rms subwoofers 2000max. 1 crescendo audioBC3500 running at 0.5ohms powering over 4k rms watts. from amplifier and subwoofers is about 5ft. powering 4 15's dual 4's each is 1000rms 2000max sealed box 3.0cuft...

Answer:

10 or 12 gauge will do.I prefer twisted OFC rca's.as long as you don't have the old school nintendo...

Read more

johnny at Yahoo! Answers Mark as irrelevant Undo

What is the best gauge of speaker wire for home theater speakers?

what is the best gauge of speaker wire for home theater speakers

Answer:

See the "speaker wire table" at Roger Russell's page:

Read more

maxmac97 at Yahoo! Answers Mark as irrelevant Undo

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.