What is a good DVD recorder?

Getting blue screen. DVD recorder won't show cable channels. Have any idea what's wrong?

• Analogue TV Cable box Modulator DVD combo They way it is now ... Had to get a modulator because this DVD recorder doesn't have a place for coaxial cables. I hooked everything up to my modulator the way the cable box and TV used to be connected to my old VCR. Then, the modulator plugs into the DVD recorder with an S-Cable. But, something is not connected right. CABLE BOX (2 cords) One comes from the Cable in the wall The other says, "TV/VCR" and goes to the MODULATOR MODULATOR IN - Cord connecting modulator to the cable box OUT - Cord connecting modulator to my TV OUT - S-Cable connecting modulator to DVD recorder. Is this enough to connect the DVD recorder to the modulator? With my old VCR I used channel 3 and I turned the modulator to this channel as well. I can get cable until I turn the DVD recorder on and then I get a blue screen. I tried switching the channel on the modulator to 4 and it became snowy lines. I tried to change "input" on the DVD recorder to "Line 1, Line 2," to see if that would help. Still blue. I looked for a channel setting on the DVD recorder to make sure it was also on channel 3 and there was no way to set the channel on this DVD combo. Looked all through the manual and there was no mention of setting it to a channel 3 or whatever. What else can I try?

• Answer:

  Uninstall unsupported device drivers, uninstall the programs that you recently installed, repair the registry errors, and scan the system with an antivirus software. A) Uninstall Unsupported Device Drivers: 1. Click Start. 2. Type "Device Manager" and press ENTER. 3. Click View | Show Hidden Devices. 4. If you see any device driver marked with an exclamation mark, it is not supporting the system or it is faulty. Right click it and select Uninstall option. B) Uninstall Recently Installed Programs: 1. Click Start | Control Panel. 2. Click Programs | Uninstall a Program. 3. Select a recently installed program; and click Uninstall button. 4. Follow the on screen instructions; and reboot the computer when it finishes. C) Repair the Registry Errors: 1. Download Reginout registry repair. 2. Start a full registry scan. 3. Repair the problems found in it. D) Scan the System with an Antivirus: 1. Download Avast, or Kaserpsky Internet Security. 2. Update its virus definitions. 3. Start a full system scan. 4. Remove the viruses found.