HELP!!! How do I set my universal remote?

Brookstone Jumbo remote setup 1. Turn on the device with which you want to use the remote control. 2. Locate a 3-digit code for your device. 3. Press and hold the corresponding button on the remote control (TV, ) for approximately three seconds. The POWER INDICATOR illuminates. 4. Enter the 3-digit code for your device within 30 seconds. The POWER INDICATOR shuts off. 5. Press the Power button on the remote to verify correct code entry. If the device shuts off, the code was entered correctly. If the device does not shut off, repeat steps 3-4, using a different code. Sanyo codes: 022, 096, 120 Innovage Jumbo remote setup. 1. Turn on the device that you want to set. 2. Aim the remote control at the device and press down and hold CODE SEARCH button for at least 3 seconds until the red LED lights up solid red. 3. Press the device button for the item you wish to program, e.g. TV, DVD, etc. and the LED light will blink once and then remain solid red. 4. Using the number keys, enter the 1 st set of 3-digit codes from the list. You will notice that each number that you press, the LED will blink once. After you have entered the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. (NOTE: If the code entered was not compatible, the red LED will flash several times.You will then need to repeat Step 2. You have 30 seconds to enter a code.) 5. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying to program powers off, then you have found the correct code. If the device does not power off, then you will need to repeat the process again from Step 2, using another 3-digit code Sanyo codes: 004, 013, 049, 108, 110, 180, 209, 004,009