I cant find the code for my TV to enable the sky remote to work the television?

Turn on your sky and press TV on your remote control. Hold down SELECT and the RED key together until the red light on your remote control blinks twice (after about 2 seconds). Press TV again. Enter the code 0297. The remote blinks twice. Press standby on your remote control. If your TV switches off, press TV, then press standby. Repeat the sequence of pressing TV and then standby until the TV switches off, then press select. If the light blinks three times, your remote control has checked all possible settings for the code used. If all else fails then check with Sky Technical help.

if you go on interactive and customer support its free and helpful. There is a section dedicated to this problem it includes a list of codes for all models. also it tells you if your code is not there you can try the nearest model, failing that it tells you what to press so that you can find out the right one. Ours wouldnt work either so my hubby did this and you have to count how many times the light flashes and that makes up a code.. it will make more sense when you get it from interactive.. mine works great now though good luck.

i found sky customer support very helpfull,so i think you should try ringing them OR there's a place where there is a card hidden in your sky decorder(left hand side bottom)push that lid backwards and pull it up then ther will be a card if u find it push it too

Go to the sky website. I believe they have a list of manufacturers with codes. If not there customer services definitely will.

do you still have the book that came with it. the code are in there to fix that. hope that helps ya out

Hi, messing around with different sites I came up with 085710002 under a heading codice. This may be what you want, hope so.

Have you tried ringing the Sky customer services line? I found them very helpful recently.

try 0297

if you have not put a code in it will be factory setting ie 0000 or 1234 try that