Find solution
How do you use Windows Movie Maker after using the flip video camera?

How to connect a video camera with a iLink port to a PC running windows XP.?

  • I've bought a USB cable with a 4 pin IEEE1394 connector on one end and a USB A connector on the other. When I connected the video camera using the cable to the PC, Windows XP indicated that an unknown device was installed. I intend to use Windows Movie Maker 2 to import the video clips into the PC.

  • Answer:

    First thing, this doesnt work, even it is supposed to, movie on USB sucks on quality!!. You need a Firewire card with IEEE1394 ports. And a IEEE1394 4pin to 9pin connector. Assuming u dont want to do that, you need USB drivers for your camera and installing that will enable you to use the camera on ur PC. Check out in the Manufacturer's website for the same. .:Fishie:.

for my info at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

update your windows xp through the internet. then unplug the cable and replug it again. ps: you might need to restart the computer. also check if the usb ports on your computer is usb 1.x or 2.x. good luck! mercury of love

mercury of love

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.