How can I enable cors on openshift?

What else could be done if we can't enable the network adapter on the PC after clicking the enable button?

  • we are getting windows cannot enable this device error when we try to enable it.

  • Answer:

    Check to be sure you have the correct drivers, that's the most likely cause. Just go to the manufacturer's website and they should have them. If that doesn't work, check to make sure that the network card is seated all the way in it's slot (if it is a card, and not on-board) and if *that* doesn't work it may be fried, and you'll need a new network card.

The Resurrectionist at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Some network cards have an onboard processor that you can use instead of the main CPU for certain functions. If your NIC driver supports this onboard processor, you can enable it as follows: Start regedit.exe. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControl… From the Edit menu select New, DWORD value. Enter a value name of DisableTaskOffload and press Enter. Double-click the new value and ensure that it's set to 0. Click OK. Close regedit. Reboot the machine. If that don't work try these two websites:

justamom

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.