Find solution
How do you change the ink to print with?

I have change the ink in my printer but it won't print now. So what do I do next?

  • Answer:

    Did you remove the clear piece of tape off the bottom of the new cartridge ? Most printers have a self help print page. If you have the manual for the printer, see if you can find out how to run a test print page. It is also possible your printer is out of alignment. If you go into your Control Panel (classic view) and chose PRINTERS & SCANNERS . You should see your printer listed, right click on it and chose Properties. See if any of the settings there are wrong and also look for an Alignment (tab)/Button and a Test Print button. Good Luck

Linda W at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

It could be the print head problem, and it is usually not economical to repair it. Some printers however, has a function that enables cleaning of print head. Look through your user manual and see if your printer comes with this function.

mk6164

Sometimes you have to clean the print. There is a setting in the software that came with the printer.

MensaMan

Did you take the plastic tape off of the nozzle?

Ron B

buy a new printer

Chemical

Remove the cartridge, confirm the plastic strip is removed from the electrical contacts, follow the manual instructions and reinsert the cartridge making sure that it snaps into place. --- Should work

Matt D

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.