How can I disable default blocks in Drupal 7 without touching the Blocks Config admin?

Default Username and Password for Network Config - HP Laserjet 3052?

• Anyone know the Default Username and Password for the Network Config in regard to a HP Laserjet 3052. I tried Admin Admin, Admin password, admin admin, admin (blank), (blank) (blank). Think I may need to do a cold reset :(

• Answer:

  There is no "Default" username or password for the HP Laserjet printers. The "Default" is no password at all. If one is currently set for the printer, then someone set it manually and you'd have to get it from them or reset the printer. A cold reset is unlikely to change the network access password, but you can try it and see what happens. Otherwise you'd have to do a deeper printer reset to clear it. Here's a section from the User's Manual for that printer: Set my network password Use HP ToolboxFX to set a network password. 1. Open HP ToolboxFX and click Device Settings. 2. Click the Network Settings tab. NOTE If a password has been set for the all-in-one previously, you will be prompted to type the password. Type the password, and then click Apply. 3. Click Password. 4. In the Password box, type the password you want to set, and then in the Confirm password box, type the same password again to confirm your choice. 5. Click Apply to save the password.