Good Eyefinity monitors?

Good monitors for Eyefinity setup?

• I would like to get a really good Eyefinity monitor setup going on. Although, I do not know what monitors to get. The card I am getting is the Radeon HD 6950 Sapphire Flex edition so I do not have to buy the active display port adapter because I want to save a bit. I really want something with a slimmer bezel. I was looking at the AOC e2343F LED monitor and wonder if it is good for Eyefinity and if there is any ghosting at all. Please leave your opinions, any are much appreciated. Thanks, Artey.

• Answer:

  I just bought that same card.... no joke. love it. although the hdmi cord it comes with is junk. just use the dvi converter. I went with three of these. Acer S211HLbd 21.5'' 5ms LED-Backlight they have around 3.5mm bezel and if it is full 1080p... they are bright so you have to adjust the brightness. although the card does not hold over 30fps in the 5780 X 1080p. on ultral bf3. but does in med. and almost does in high. in terms of goshting I have none. then again my rig, HD6950 2gb flex. monitors 3 x Acer S211HLbd 21.5'' 5ms LED-Backlight using DVI DVI and hdmi to DVI. (there is no tearing unlike active adapters) 2600k- @ 3.8 (so it times with the 8 cas 1866 ram (after mrk Hsink (intels blows)) 16 GB 1866 p67 evo board. hdd 1 tb wd black(data and VM drive. ) 256GB ssd(OS & games) 750 watt psu. if you have and questions about the card just ask.... no have not oced it. it under load sits just over 61C in a 70F room. that is the 5780x1080p...