How do I burn my pictures on to a DVD-r disc?

Burn error at 98% to 99% using Nero and DVD Shrink...Computer Whizz Advice required -TOP POINTS TO BEST ANSWER

• I would like to know what the problem is with both Nero and DVD Shrink on my computer. The problem has been going on for about 1 month. I have tried every possible action from deleting and re-installing Nero and DVD Shrink. The disc always seems to stop at the 98-99% point but it still plays back perfectly. The problem I have is that I burn my data using a re-writable DVD in order to avoid stuffing up DVD's. I have tried reducing the burning speed and even downgraded from Nero 7 to Nero 6. I rip my DVD's using RipIt4me and it's fine. It's just when I either want to burn the final product through DVD Shrink or copy a DVD using Nero, it tells me their is an error and burn process failed. However I tried burning my same projects with DVDFab Platinum and they burnt fine with no errors, but I like using Nero because I’m used to it. I have included the reports that come when a burn process fails. Also since this burning failed thing first occurred, my computer has frozen like 4 times and this blue screen comes up with white writing and this is what it states: ‘A problem has been detected and Windows has been shut down to prevent damage to your computer DRIVER_TRQL_NOT_LESS_OR EQUAL If this is the first time you have seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you may need. If the problem continues, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Start Options and then select Safe Mode. Technical Information: ***STOP: 0x000000D1(0x00000018, 0x00000002, 0x00000001, 0xF770D83B) ***tosrfusbisys-Address F770D83B base at F70D000, DateStamp 43c5cc25 Begin dumping of physical memory Physical Dumping Complete Contact system admin or technical support group for further assistance’ --------------------------------------… NERO BURN ERROR REPORT: 1C82-0000-19E5-MAAX-4007-6108-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM NT-SPTI used Nero API version: 7.8.5.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 8, 5, 0 Recorder: <_NEC DVD+-RW ND-6650A> Version: 102C - HA 1 TA 0 - 7.8.5.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Hitachi HTS541080G9SA00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1014MB (1038712kB) Free physical memory: 573MB (587072kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.4.2007 NeroAPI 6:21:39 PM #1 Phase 112 File APIProgress.cpp, Line 285 DVD-Video files reallocation started 6:21:39 PM #2 Phase 114 File APIProgress.cpp, Line 285 DVD-Video files reallocation completed (no file modified) 6:21:39 PM #3 Phase 111 File APIProgress.cpp, Line 285 DVD-Video files sorted 6:21:39 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:21:39 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:21:39 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 6:21:39 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 6:21:39 PM #8 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 6:21:40 PM #9 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2275647 (505:41.72, 4444MB) 6:21:40 PM #10 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO 6:21:40 PM #11 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD-RW Disc Manufacturer: CMCW03 - Disc Application Code: 2, Disc Physical Code: 214 6:21:40 PM #12 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< =====================================… 6:21:40 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2275648 (2275648) = #2275648/505:41.73 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2275648 blocks [D: _NEC DVD+-RW ND-6650A] -------------------------------------… 6:21:40 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: _NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4660527104, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|___… 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2275648 | 0 | 0x00 2275648 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:21:40 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:21:40 PM #16 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-No, small files-Yes (<32KB) 6:21:40 PM #17 Phase 24 File APIProgress.cpp, Line 285 Caching of files started 6:21:40 PM #18 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 6:21:40 PM #19 Phase 25 File APIProgress.cpp, Line 285 Caching of files completed 6:21:40 PM #20 Phase 36 File APIProgress.cpp, Line 285 Burn process started at 2x (2,770 KB/s) 6:21:40 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:21:40 PM #22 Text 0 File DVDR.cpp, Line 3192 Recording mode: Sequential Recording Mode 6:21:40 PM #23 Text 0 File DVDR.cpp, Line 3348 Start write address at LBA 0 DVD high compatibility mode: Yes 6:21:40 PM #24 Text 0 File Cdrdrv.cpp, Line 9856 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Extended Part Version: 1.2 (18) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 2.0 Revision number of minimum recording speed: 1.0 Revision number table of recording speed: - - - - - - - Class: 3 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:21:40 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 6:21:41 PM #26 Text 0 File Cdrdrv.cpp, Line 1338 18:21:41.765 - D: _NEC DVD+-RW ND-6650A : Queue again later 6:49:20 PM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 21 FB 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x1b4e9140: Len x10000 0x00 00 01 BA 44 06 87 60 04 01 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 56 EE 96 EA 83 4E BC 4A 83 0x16 2E EE B8 C3 0D 43 32 F4 CF 3F 6C 63 80 7C 45 6:49:20 PM #28 CDR -1135 File Writer.cpp, Line 303 Write error D: _NEC DVD+-RW ND-6650A 6:49:20 PM #29 Phase 181 File APIProgress.cpp, Line 285 Writing lead-out... 6:49:20 PM #30 Text 0 File DVDR.cpp, Line 3750 EndDAO: Last written address was 2226943 (21FAFFh)Estimated time for 30mm Borders: 0min 00sec 6:49:20 PM #31 Phase 38 File APIProgress.cpp, Line 285 Burn process failed at 2x (2,770 KB/s) 6:49:20 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 6:49:20 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 6:49:20 PM #34 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:49:22 PM #35 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 6:49:22 PM #36 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/28/2006 5:53:22 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROM… : 0 (Security Option) --------------------------------------… DVD SHRINK BURN ERROR REPORT: 1A20-020E-0010-1727-0457-3471* 1A20-0218-0370-1725-8155-4331* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero API version: 6.3.1.26 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <_NEC DVD+-RW ND-6650A> Version: 102C - HA 1 TA 0 - 6.3.1.26 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : Hitachi HTS541080G9SA00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1014MB (1038712kB) Free physical memory: 381MB (391060kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.4.2007 NeroAPI 6:00:58 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 6:00:59 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 6:00:59 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 6:00:59 PM #4 Text 0 File Reader.cpp, Line 126 Reader running 6:00:59 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:00:59 PM #6 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD+-RW ND-6650A running 6:00:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 6:00:59 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 6:00:59 PM #9 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-At-Once, using DVD media 6:01:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2202175 (489:22.25, 4301MB) 6:01:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 6:01:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD-RW Disc Manufacturer: CMCW03 - Disc Application Code: 2, Disc Physical Code: 214 6:01:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< =====================================… 6:01:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2202176 (2202176) = #2202176/489:22.26 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202176 blocks [_NEC DVD+-RW ND-6650A] -------------------------------------… 6:01:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [_NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510056448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_Ctrl… 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2202176 | lead-out | 1 | 0x00 | 0x41 6:01:00 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 6:01:00 PM #17 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 6:01:00 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 6:01:00 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 2x (2,770 KB/s) 6:01:00 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:01:00 PM #21 Text 0 File DVDR.cpp, Line 2020 Recording mode: Sequential Recording Mode 6:01:00 PM #22 Text 0 File Mmc.cpp, Line 20698 Set BUFE: JustLink -> ON 6:01:00 PM #23 Text 0 File DVDR.cpp, Line 2161 Start write address at LBA 0 DVD high compatibility mode: Yes 6:01:00 PM #24 Text 0 File Cdrdrv.cpp, Line 8228 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 3 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FEA0 h Media Specific [16..63]: 00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................ 00 02 FE 10 00 02 FE A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:01:04 PM #25 Text 0 File Cdrdrv.cpp, Line 1297 18:01:04.890 - _NEC DVD+-RW ND-6650A\H1 T0 : Queue again later 6:28:03 PM #26 Text 0 File WriterStatus.cpp, Line 115 <_NEC DVD+-RW ND-6650A> start writing Lead-Out at LBA 2202176 (219A40h), lenght 0 blocks 6:28:03 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:28:03 PM #28 Text 0 File DVDR.cpp, Line 2403 EndDAO: Last written address was 2202175 6:28:22 PM #29 SCSI -1135 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 6:28:22 PM #30 CDR -1135 File ThreadedTransferInterface.cpp, Line 1708 Write error 6:28:22 PM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708 Could not perform end of Disc-at-once 6:28:23 PM #32 Text 0 File DVDR.cpp, Line 2403 EndDAO: Last written address was -1 6:28:23 PM #33 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 2x (2,770 KB/s) 6:28:23 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 6:28:23 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/28/2006 5:53:22 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROM… : 0 (Security Option) Help would be appreciated and I don’t think there is anything wrong with my burner because it burnt CD’s fine and also DVDFab Burns Fine

• Answer:

  Since it always seems to happen towards the end of the burn you can try customizing the size of the disc in DVD Shrink to avoid burning near the edges of the disc. Start Shrink... go to Edit==>Preferences. Where it has Target DVD Size select custom and type in 4300 MBs. Click OK and try a burn and see if that helps.