Find solution
How to Wire a telephone jack?

Phone jack (weird inside, different from others) tried to wire?

  • Okay, the second floor telephone line is not working while the first floor is working. The jack in question is different from other jacks. The other jacks have four screws where you wrap around the green and red wires. This jack has four sets of "3 teeths". Okay, imagine this jack as the center and two white cables attached to it by the left and the right. The two white cables have the standard red/green wire. How do I connect? Or link the site that explains this jack in question.

  • Answer:

    sounds like the jack that you have is a keystone jack, or jack that requires a special punch down tool to connect the wires... this shows you how to wire a keystone jack http://cableorganizer.com/learning-center/how-to/how-to-wire-keystone-jack.htm the link is showing how to wire CAT5 jacks... you have green/red wiring... green=blue/white red=solid blue

Tcellgen... at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Not sure what you are asking. It would be easiest for you to go to a hardware store and buy a new jack they are not very expensive. My guess is that the jack you are talking about requires a punch down tool which you will not have. Red and green are the proper wires to use. The jack in question sounds like sort of a junction box. Feel free to email me for further detail

wbond1963

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.