How to program a GE universal remote?

I HAVE A GE UNIVERSAL REMOTE CONTRAL AND I NEED TO FIND OUT HOW TO PROGRAM MY TOSHIBA TV/DVD?

• I HAVE A GE UNIVERSAL REMOTE CONTRAL AND I NEED TO FIND OUT HOW TO PROGRAM MY TOSHIBA TV/DVD

• Answer:

  TOSHIBA TV/DVD 4 digit code: 0394 0924 TOSHIBA TV/DVD 3 digit code: 394, 902 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program. 2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release. 3. Press and release the button for the device you are programming(TV, VCR, DVD, etc.). For AUX, press AUX then the device button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit. 4. Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will turn off. 5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the POWER button. Your device should turn off. If your TV, VCR, DVD, etc. does not respond after you have tried all the codes for your brand or if your brand is not listed, try searching for your codes by following the steps below. 1. Turn on the device you wish to program. 2. Press and hold CODE SEARCH/SETUP until the INDICATOR LIGHT lights, then release. 3. Press and release the device button for the device you are programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device button you are assigning to AUX. 4. Press and release POWER until your device turns off. Wait at least 2 seconds between each time you press POWER. Important: You may have to press POWER up to 250 times. 5. When your device turns off press the ENTER/SAVE button. The INDICATOR LIGHT will go off.