How do I use auto-increment within a trigger?

Please explain how to use the bowens pulsar radio trigger device?

• I have bought a new flash radio trigger system, but I am struggling to get it to trigger my flash head even though I've tried all the transmit/receive combinations! Am I right in thinking that I don't need a sync lead between the camera and the unit?

• Answer:

  This is a Master/Slave system (2 units required). You have the Master (sender) connect to your hotshoe of your camera. You have the slave (reciever) plugged into the sync jack of your flash using a short cable from the PC jack on the end of the slave. You have the camera speed set to 1/60-1/200 of a second. Nothing faster than 1/200 of a second. You make sure that the master and slave are on the same frequency (BOTH slider on side marked STUDIO & Channel on top). To make sure that the master/slave are communicating hit the little red test button on the top of the master. If that fires the flash then you are connected correctly.