Is the mass air flow sensor dead?

Lexus is-f, i just put in new intake and mass air flow sensor. i cant control right window from drivers side?

  • Lexus is-f, i just put in new intake and mass air flow sensor. i cant control right window from drivers side? just installed a srt intake and ecu mass air flow sensor in my dads 2008 lexus isf. now the right front window wont roll up. what wires did i misplace or mess with because i wasnt near the wires for the window.

  • Answer:

    Hello "MotoX92" Check the fuse box, maybe You short circuited something and it messed up the window. Also, try putting back the original stuff and see if it works, because if it does, then maybe the srt or air sensor is not compatible with IS F. Plus, sometimes You have to give it time or try checking the manual. Good Luck.

MotoX92 at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Did you disconnect the battery? To calibrate the windows run each one open and closed at each door. this will fix your problem.

R C

the window is prob not calibrated any more, roll the window down and hold the switch in the manual up position, when the window closes hold the switch there for 5 seconds. should work then

Dustin W

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.