Are 4.6l SOHC and DOHC engine harness the same?

Sohc engine into dohc engine?

  • can i take a sohc engine and turn it into a dohc engine without a lot of work

  • Answer:

    its not as bad as it sounds to do ,you do have to change the computer and the wiring harness in it though and without a parts car to work with its going to cost,i did it on my car but i went out and found one with a bad engine just to get the wiring harness and all the other parts i needed,its a lot of work though,if you got the time and something else to drive you can do it real easy in a good week end,good luck.

jd at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

it's a pretty good amount of work. I'm assuming you have a small, probably import, motor. First, you'd have to switch heads to a DOHC head, make sure that your valves will still clear the pistons at top dead center, you'll have to get a new timing belt, and possibly a new gear for the end of the crank, and you'll have to have a professional reprogram your computer, or possibly order a computer for a DOHC engine. Long story short, it would be cheaper and easier just to find a DOHC motor to put in it.

Stangman

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.