Step by step removal power seat 95 dodge ram?

I have a 2003 dodge ram 1500 that the interior lights, cargo lamp, power mirrors have no power?

  • Glove box light, map lights, dome lights, cargo lamp and power mirrors do not have power to them. Fuse 17 is good with good power to both sides of fuse and was swapped out with another fuse, however when I remove connector C1 from the bottom of Integrated Power Module (fuse panel) there is no power coming out of (IPM) C1 pin 13 that supplies power to them. I jumper wired connector C1 pin 13 to the battery and they all worked. I am not sure why the power is not coming out of the fuse box (IPM) from fuse 17. Could it be the front control module that is causing this or the instrument cluster?

  • Answer:

    its possible that the wiring after it leaves the fuse box is bad or shorting out

Donny at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

check the fuses under the hood in the fuse panel you will find your problem. most likely the acc. fuse and or relay.

tomblindewey

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.