Find solution
How do I install radio in Dodge Intrepid?

How difficult is it to install a new radio in a '98 Dodge Neon?

  • How difficult is it and how do you do it?

  • Answer:

    You need to get the install kit, it has the wiring harness adapter, and the mounting bracket. Take off the HVAC and Radio panel from the front, then remove the two screws holding in the existing radio, remove it. Take your new wiring harness from the kit and solder connect the wires from the new stereo to the harness making sure that you match the correct wires up. Then plug in the harness to the factory harness, install the new radio, and you are in business.

Eric at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

VERY EASY!!! Simply pull the bezel around the stock audio unit to remove. There are no fasteners. Once removed, there are two 3/8" or 10mm self tapping screws that secure the stock audio unit to the instrument panel.

Rakel

No, but with places like circuit city and best buy, that do the install for free, why would you want to go threw the hassle?

gibson_slayer

It's very easy. My friend puts a new one in his '95 Neon every time someone breaks in and steals the old one. It's also VERRRRRRRY easy to break into Neons.

Duh!!!

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.