What are the best skateboard parts?

deck- just go to a skate shop, not much difference you just need to to figure out what size such as most skaters ride 7.5 and some including me ride 7.75 which is a quarter of a inch wider and then there are 8.00 and other sizes and also just get a pros signature deck there usually good. trucks- theres different sizes, low mid and high and the width of them depends on how big your deck is like if you have a 7.5 deck you need width of the trucks to be 7.5 and also make sure to check the lightness cause this will help alot, grind king g7's are very light trucks and so are krux and venture. wheels- usually about wheels is the size, first board I got had 56mm wheels and they was big and i didn't like it so i moved down to 54mm which there worn down to about 53mm now. bearings- if you have the money id suggest getting bones black but bones red are close to being as good at alot cheaper price. grip tape, hardware and risers- pig grip tape is good, zero hardware is good and if your bad for breaking decks then make sure to get risers because they help your trucks fit better to your deck lowering your chances of breaking it and about any riser would do. check www.ccs.com and learn about the parts and sizes

yeah dood, i can. trucks: Indy's or krux, awsome trucks, last a very long time. bearings: Very hard 2 get the right kinds, but id go with lucky's or bones swiss. griptape: Iron horse or mob. lasts forever. very strong. Risers: forget risers for now, but if u really want em, get pig's. WHEELS: u fergot these on ur list! totally get pig wheels, last forever. TIP: PUT UR WHEELS IN THE FREEZER! put em were the ice is, makes em last longer! Decks: get REAL's or krookeds. very strong.