Find solution
What Are Good 20" Bikes?

Whats the tool used to take out and put pegs in bmx 20 inch bikes?

  • whats the tool used to take out and put pegs in bmx 20 inch bikes? i wanna buy just that Lolz

  • Answer:

    What unclean said. Depending on what pegs you have, some have a hole through them. If this is the case (and the pegs were installed properly), you need to remove the axle nut with the socket and extension, then put a rod or screwdriver through the hole and twist the peg loose. When installing pegs, never just screw them onto the axle... remove the axle nut, install the peg, then reinstall the nut through the peg. If you don't do this you'll be treated to a bent or broken axle. This goes for threaded pegs as well.

Vietdrea... at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

usually you need a ratchet with a long socket, like the kind you use for sparkplugs... just remember to measure the width of the nut so you know what size... any auto parts store will sell what you need.

uncleneal

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.