I locked something (i wont tell you) important in mr drawer. Can you give me a site on how to pick a lock?

If its just one of those slide locks just slide something flat yet hard that should work

Maybe there's another way in. Picking a lock is hard. Is the bottom of the drawer exposed? Is it wood, or plywood? If so, then you can drill through from the bottom and cut out the center panel. Once you have the key ( I assume that's what you locked in there) you can open the drawer, and replace the drawer bottom.

Call a locksmith.

whats in the drawer?

http://www.wikihow.com/Pick-a-Lock it's okay you don't have to tell us what's in there. we have imaginations :)

if all fails place a tiny diamond bit into a rotary tool & grind inside the keyhole it will take approx 15 min to destroy the tumblers & pins. Finally replace the lock.

Youl locked the key in the drawer didnt you. The most important thing to a locking drawer is the key to that locking drawer. Without the key all the important stuff becomes much less important doesnt it. I would suggest smashing the drawer open with a hammer and screwdriver than replacing the drawer with a safe, just dont lock the combination to the safe IN the safe. The combination is only good if it is on the outside of the safe.

oh boy-here we go again! dammit whats wrong with you kids? I did this about 2weeks ago, here we go: you will need a flat screwdriver and a sturdy credit card (the one you tend to over use) 1. use the flat screwdriver to move the latch down, it will take a little playing around with once you get it down slide the credit card over to keep it down and WOW you just pick your very first lock. And next time check your spelling :-)

smash it before someone else finds what you have in the safe