Find solution
How to remove a bed off a ford ranger?

How do i remove the bed from a 2001 ford ranger? please be specific. any help would be deeply appreciated.?

  • Answer:

    So have you decided to lift the bed rather than drop the tank? It's not real hard. There should be electrical connectors that run to the brake lights, the harness may or may not attach to the bed, it usually runs along the frame rail. You will have to remove the bedliner if you have one, also, to lighten it up a bit, remove the tailgate. Then remove the fuel fill line (three or four screws) at the bed side. Remove the bolts that hold down the bed, then you can just lift up the left side enough to change the pump, put some blocks of wood on top of the frame, or if you have a strong pal, pick up the bed and slide it back far enough to get to the pump.

steele94... at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

First you should take care of the electrical. This includes disconnecting the battery and removing the tail lights. Also check under the bed to disconnect anything that might be connected to the underside including fuel lines, brake lines, and electrical wiring harnesses. After that you can remove the 4 torx head fasteners inside the bed and lift the bed from the truck. ou may want to get a couple of friends to help you lift the bed off.

jwelsh1021

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.