How To Build Your Own Scissor Lift?

How to build a mini Scissor lift?

  • So for part of my project i need to build a scissor lift aproximatly 1m wide and 1m long from scratch. If someone please tell me what i would need and how to put it together i would be very greatfull, as i cannot really find any guides on the internet. Also it does not need to lift anything heavy, only maybe 1 or 2kg. This is for my year 12 systems engineering project.

  • Answer:

    most car jacks are scissor jacks, so you can look at the jack that came with your car. As for making a light weight one, you could build one out of either square tubing, or angle iron. all the joints for the diagonal sections will need to pivot, and you'll need a mode of force, such as a section of all thread with a bushing of some sort on one end, and a nut fixed to the frame at the other. The bushing could be as simple as a hole through a cross member and a set of double nuts on each side of the cross member.

Bob234 at Yahoo! Answers Visit the source

Was this solution helpful to you?

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.