What's your best COD4 gun and Why?

Whats wrong with my tsd m1911 blowback airsoft gun?

  • i got the tsd m1911 blowback airsoft gun for crhistmas and whenever i put the c02 into the gun i hear a leeking noise its not the magazine because i put my brothers mag into the and it did the same thing btw his gun works fine. this is very urgent help

  • Answer:

    The problem is either very simple or complicated the simple one is that you just didn't tighten it enough or the o ring is very dry. To fix this just tighten as much as u can in the form of help such as a parent or a stronger fellow just not to much. Then before you insert the co2 cartitage where u put the top of the co2 there is a small place where the tip goes into the rubber insert prevents leaky gas but when its dry it doesn't work well. Oil it with 100% silicon only anything else will work but it will just make it worse soon or later. If that doesn't work either your mag has a valve issue or the o ring is missing all together.

audrey at Yahoo! Answers Visit the source

Was this solution helpful to you?

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.