Find solution
What amp do I need to push my 2 12's?

If you have 2 kicker comp 12s with a max of 300/150(peak watts/rms), do you need a 600 watt amp or higher?

  • I cant figure this out. I have 2 comp 12's, i need to find the perfect amp for the absolute best performance. I would also like the amp to be a kicker prodect to keep all the components the same brand. I dont want to get a amp with to little power because i plan to upgrade to some compvr's someday. what would be a great amp for my setup? Thanks alot guys!

  • Answer:

    max really means nothing unless your doing competitions and burping the subwoofers. but if its a everyday driving system then the rms is what you need to go by. so 150rms each will be 300watts rms. ill get a 350 or 400 watt mono block amplifier should do you good. im guessing you have dual 4's which is typical so get a amplifier thats stable at 1 ohm load with 350 or 400watts rms.

Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Just look at the rms value. If it is 150 per then it would be 300 for both so you need to find a kicker amp that has at least that or a little more. No more than 500 rms would work.

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.