Find solution
Help wiring 1 sub to a 2 channel amp.

2 kicker l7 solo baric 12's and a hifonix bxi 2010 need amp-sub wiring help (with links)?

  • Okay i'm purchasing two kicker l7 12' solo-baric subwoofers. # 12" subwoofer with dual 4-ohm voice coils # SoloKon aluminum-treated composite cone with Santoprene surround # cast-aluminum basket # power range: 50-750 RMS watts (375 watts per voice coil) # peak power: 1,500 watts # frequency response: 20-100 Hz # sensitivity: 88.84 dB # mounting depth: 6-5/8" # sealed box volume: 0.88-2.00 cubic feet # ported box volume: 1.75-3.25 cu. ft. These subwoofers are available in 2ohm, or 4ohm. Now my amp. Hifonics BXi 2010D. # Brutus BXI Single-Channel Monoblock Super-D Class Car Amplifier # RMS Power Rating: * 4 ohms: 650 watts x 1 chan. * 2 ohms: 1300 watts x 1 chan. * 1 ohm: 2000 watts x 1 chan. # MOSFET Power supply # Super D-Class amplifier relies on a super-speed enhanced chip-set to produce higher current capacities and more precise digital to analog conversions # Wired remote bass level control included # Power and Protection LED indicators # Built-in system diagnostics offer protection of DC, Speaker short, terminal, and overload # Tuned Bass EQ (0-10 dB bass boost at 45 Hz) # Dampening factor: >250 # Single-channel monoblock channel operation # 1-Ohm stable # Phase shift: 0-180 degrees # Preamp RCA outputs # Input level control: 0.04V - 18V # Balanced line input for MX accessories and line drivers # Heavy duty aluminum alloy heatsink for extreme heat dissipation # RCA level inputs # Screw terminals # Variable low-pass filter (35-250 Hz, 24 dB/octave) # Subsonic Filter (15-35 Hz at 24 dB) # Frequency response: 35-250 Hz Now my question to you guys is - The amp is one channel, can i run both subs off of the one channel amp? And if so, what ways could they be wired? (links to pics, pros/cons, please) - Should (with the amp i have chosen) purchase 2ohm, or 4ohm woofers? Thanks folks and just let me know if there is any other information needed. Please, reliable information guys. Not backyard mechanics.

  • Answer:

    For more help and interactivity pease visit and join http://www.carstereoforum.net/index.php Many knowledgeable people and staff to help.

Patrick R at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

You want reliable information? Visit the below website. The Hifonics is rated for 2k RMS at 1ohm, so you want two Dual 4ohm subwoofers. Yes, you can run both subwoofers off that amplifier. It's a monoblock and is made specifically to run subwoofers. Note - You can run as many subs on an amplifier as you want to. The only thing you have to be sure of is to make sure you're not dropping the ohmload too low on the amplifier. Cheers Ryan

no pics or diagrams, but yeah you can wire them series or parralel, if i am not mistaking eries will put them at 8 ohms, parralel will put them at 2 ohms and you can do that up to 4 speakers to make it 1 ohm, since its 1 ohm stable, but remember the higher the power and lower the ohms the more heat that gets generated

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.