Find solution
Can I use a Marshall Amplifier as a speaker in my car?

IS THIS A GOOD MATCH??? (CAR AUDIO QUESTION)?

  • I went on a trip for a family wedding in houston texas i heard of a street there that has lots of stores that sell different stuff and they underprice it so i been wanting a subwoofer and amp for my car they gave me a good deal but i dont know speaker's and car amp's that well so is this a good match i got a MTX Thunder 3202 Amplifier Manufacturer: MTX Audio Part Number: TA3202 GeneralProduct Type Amplifier Recommended Use Car Width 12.8 in Depth 9.6 in Height 2.6 in Audio SystemAmplifier signal-to-noise ratio 78 dB Amplifier continuous power / channel qty 50 Watts x 2 Amplifier output 2-channel Amplifier input signal voltage 0.1 - 10V Crossover type 2-way active crossover Crossover low pass frequencies 85 Hz Crossover high pass frequencies 85 Hz Amplifier / Amplifier Class Class AB Amplifier distortion factor 0.1% Amplifier Output Details 50 Watt - 4 Ohm - THD 1.0 % - 14.4V DC - 2 channel(s), 100 Watt - 2 Ohm - THD 1.0 % - 14.4V DC - 2 channel(s), 200 Watt - 4 Ohm - THD 1.0 % - 14.4V DC - 1 channel(s) Additional features Cooling fan, Thermal protection, Overload protection, Input level controls And a Kenwood KFC-W2511 1000-Watt 10-Inch Subwoofer Product Features 1000W Max Imp: 4 Rated Input Power: 300W 8Awg Wire Capable Titanium-Coated Polypropylene Cone Technical Details Brand Name: Kenwood Model: KFC-W2511 Speaker Type: Car subwoofer driver Speaker Amplification Type: Passive Speakers Maximum Output Power: 1000 Watts Speakers Response Bandwidth: 30 - 1000 Hz Speaker Connectivity: Wired Depth: 6.5 inches Weight: 9 pounds Im starting to think that the amp isn't powerful enough for the speaker but then again i dont know this stuff to well so please anybody help me with this thank you.

  • Answer:

    it will do the job its fine just bridged the amp !!!!good luck

Rockstar... at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

always go for a powerful amp then sub if the amp is powerful and the sub is not as powerful then you dont have to run the amp as hard. flip flop if sub is powerful and amp is not then the sub will take more juice ending up in overheating or the amp failing my subs are 300 rms a piece and amp is 500 rms per channel and its great turn the amp half way and it powers the subs great and keeps the amp cool

the amp is way too low to power your sub, i'd say go with anywhere between an 800-1000 watt amp. you can get one off ebay for cheap

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.