Which amplifier should I buy for these speakers?

What would be the best Amplifier to buy to get maximum performance from my 2 subwoofers and 2 speakers?

• Ok so i have 2 subwoofers here is a link to them,http://www.crutchfield.com/p_500SWX1043/Alpine-SWX-1043D.html?tp=111 Specs for subs: 10" subwoofer with dual 4-ohm voice coils pulp/fiber cone reinforced with Kevlar and a layer of Rohacell® plastic film Santoprene rubber surround cast aluminum frame power range: 500-1,000 watts RMS (500 watts per coil) peak power handling: 3,000 watts frequency response: 26-200 Hz sensitivity: 82 dB top-mount depth: 8-5/8" sealed box volume: 0.5-1.0 cubic feet ported box volume: 0.8-1.5 cubic feet I also have 2 6X9 Speakers http://www.crutchfield.com/p_500SPR69C/Alpine-SPR-69C.html?tp=91 The Specs for the 6X9's:6"x9" 2-way car speakers (pair) hybrid layered-pulp woofer with rubber surround 1" swiveling silk ring-dome tweeter power range: 2-100 watts RMS (300 watts peak power) frequency response: 60-27,000 Hz sensitivity: 89 dB top-mount depth: 3" Im tryin to find out how big of an amp i will need to Run all these so if you could let me know that would be great!

• Answer:

  powering those subs is going to take a lot of power. if you want to keep it alpine, try the MRP-M500. even with that amp, you will probably need two if you want to power the subs to the 1000 watts rms. for the speakers, you can something like to MRP-F300. you can always go with another brand at a way cheaper price, but it is up to you.