How do i connect my psp to a linksys router?

How can I connect a Paradyne 6218-I2 router to a Linksys WRT54G router.?

• My ISP issued me a Paradyne 6218-I2 router/modem mixture. The thing is it only has 2 internet ports. I called the ISP about it and they said the last 2 are for TV. If I connect Ports 3 or 4 to a computer through ethernet it will say Limited or no connectivity. The guy who told me over the phone said there is a way to change that so the last 2 send internet instead but he didn't know how to do it and I can't find a way to do it online. So I tried to connect that router to my Linksys router in hopes of sending internet through the ports. There are 3 computers that need to get online and only 2 can at a time. I connected one wire from the Paradyne router to the Network input on the back of the Linksys(the individual input) and then connected the 3 computers from the linksys router through the ethernet. I did that, reset both router to factory settings, and I was actually connected but for only a few seconds. It connected as "Local Area Connection 1" was pending. As soon as it connected the internet stopped. Usually my internet is a static IP and I have to put in DNS numbers in my Paradyne router. I tried static IP on both Linksys and Paradyne, then just the paradyne. Any configuration you can think of. I'd prefer to get the paradyne to send out 4 internet ports instead of 2 if someone would know how. I dont care if I have to get into the router firmware or even inside the router itself. Any help will do. Thanks.

• Answer:

  A link to the manual for the Paradyne 6218-I2 router. http://www.zhone.com/support/manuals/docs/62/6218-A2-ZB23-10.pdf http://search.zhone.com/query.html?qt=Paradyne+6218 or go to zhone.com and in the search function at the top of the page type Paradyne 6218-I2