I'm trying install CD/DVD burner on the same IDE as my hdd and only one or the other will show up!?!?
-
I have a Dell Optiplex gx270 with bios version A03 2.4GHz 512mb 80GB hdd. It only has a floppy drive so I want to put a CD/DVD burner on it to load windows xp home through it. I have two IDE connectors but it seems only the IDE 1 is picking anything up. I'm trying install a Samsung CD/DVD burner on the same IDE as my hdd and only one or the other will show up. Or.. I have IDE 1 and IDE 2. Only IDE 1 seems to let anything show up.. Here is what I did: I first took the IDE cable with a middle connector and plugged it into IDE 2 on my motherboard and left my hdd on IDE 1. The hard drive showed up but the CD/DVD drive did not. It said, "not installed". The second time: I disconnected my hdd from IDE 1 and connected the CD/DVD drive to IDE 1. and I connected the hdd up to IDE 2. The hdd didn't show up but the CD/DVD showed up and started loading setup for windows. (which is what I want! but I need the hdd too obviously). The third time: I tried hooking up both the CD/DVD and the hdd into IDE 1 and nothing in IDE 2. I hooked up the CD/DVD to the first (gray) IDE connector and the hdd to the last (black) IDE connector. It recognized the hdd but not the CD/DVD. So, I then tried it the exact opposite: The hdd in the middle (gray) and the CD/DVD to the last connector (black). It recognized the CD/DVD and not the hard drive..lol I have now clue what to do now.. I can't find anything in bios A03 that will help me.. I even tried pushing F12 (which brings me to the boot device menu) and I tried number 6. which is "IDE Drive Diagnostics" which seems to go out and search for drives but it says: Primary SATA Drive 0: No device Secondary SATA Drive 0: No device Primary IDE Drive 0: HDD or CD/DVD (which ever is connected) Drive 1: No device Secondary IDE Drive 0: No device Drive 1: No device Even if I connect anything into the Secondary IDE, it still says "No device". Thanks for everyones help on this! Joey
-
Answer:
Dells normally prefer the device to be jumpered for CS (Cable Select), look on the rear of the drive and if you need to move the jumper. It's most likley in MA or MASTER at the moment. Try that first, you should notice the hdd is also in CS, it will detect the drive and the DVD on the same cable then if you need it to.
Joey at Yahoo! Answers Visit the source
Other answers
use the jumpers
Related Q & A:
- I'm trying to write a song?Best solution by Yahoo! Answers
- I'm trying to get a meeting with a diplomat to counsel me on a career in international affairs?Best solution by Yahoo! Answers
- Why wont my MSN show what I'm playing in iTunes?Best solution by Yahoo! Answers
- How to get MSN to show what I'm listening to on Itunes?Best solution by Yahoo! Answers
- How to "show what I'm listening to" on MSN?Best solution by Yahoo! Answers
Just Added Q & A:
- How many active mobile subscribers are there in China?Best solution by Quora
- How to find the right vacation?Best solution by bookit.com
- How To Make Your Own Primer?Best solution by thekrazycouponlady.com
- How do you get the domain & range?Best solution by ChaCha
- How do you open pop up blockers?Best solution by Yahoo! Answers
For every problem there is a solution! Proved by Solucija.
-
Got an issue and looking for advice?
-
Ask Solucija to search every corner of the Web for help.
-
Get workable solutions and helpful tips in a moment.
Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.