Find solution
Where is the voltage regulator?

Where can i find schematics for a 12v voltage regulator?

  • I have a 110cc motor bike, and it has a positive output wire.. i took a voltage meter to it, and it puts out 12v on idle, and around 50 at full throttle... i want to keep the output voltage at 12v, so where would i find (or could you tell me) how to build a 12v output voltage regulator... it is DC output

  • Answer:

    Bear in mind the generator output won't be at 50V under load and there could be some form of regulation in the generator already. Easy way to do a DIY regulator is to use a 1N3311 50W 12V Zener Diode on a big heatsink across the 12V Battery/Generator output (cathode to + and anode to ground). Mount the diode/heatsink between the front forks under the headlamp. Alternatively find the correct factory regulator for your bike if there isn't one integral with the generator (you haven't said which make/model). Get a Haynes Manual for the bike and check the electrical diagram for the bike and see how it is normally wired.

Andrew Grady at Yahoo! Answers Visit the source

Was this solution helpful to you?

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.