How to do a line break for a UITextField?

Routing break line on a 1997 ford aerostar?

  • I removed the break lines from my master cylinder, distribution block, and another two port block with a wire harness plugged into it. The break lines are 3/16 and 1/4 inch. I am having trouble running the new lines. It looks like the master cylinder feeds one 3/16 and one 1/4 inch line to the top of the distributions block. The other port on top of the distribution block (slanted) feeds the passenger side wheel I have a break line going to the back of the vehicle (3/16) and one going to the driver side wheel(3/16) The block that has the wire harness has two ports, both 1/4 inch. The bottom of the distribution block has one 3/16 and one 1/4 inch port. The problem I am having is I have a 1/4 inch port coming out of the block with the wire harness and the 3/16 inch port going to the driver side wheel. It doesn't match up. Anybody have any ideas?? Thanks!

  • Answer:

    Break line forms to the left of the coffee pot. Did you by chance mean B R A K E line?

davisgeo... at Yahoo! Answers Visit the source

Was this solution helpful to you?

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.