How To Convert Crypt To Md5?

How do I convert a car to run on lp with a throttle body?

• I am building a Hydrogen generator. I know that i can produce enough of it to run my car directly off of the generator. I have already figured out how to compress the hydrogen with a small compressor. The problem I am facing now is how to convert the engine in my car to run off of LP. I say LP as I am planning to run it from a gas, not a liquid. The dilemma here is that i do not have a carburetor. I have a throttle body with injectors. I know that I can convert the injectors with a brass fitting (propane injector), but how do i convert the throttle body. How do I convert the butterfly that controls the engine speeds. All inquiries are appreciated.

• Answer:

  You would do that the way propane conversions are done. The gaseous fuel is injected into the intake,behind the throttle plate.It is metered by a vacuum regulator like this Beam 120 http://www.propanecarbs.com/beam_garretson.html As the throttle plate is opened,the manifold vac increases,telling the regulator to increase the flow. I installed one on a Grand Cherokee and fed it propane along with gasoline at the same time,increasing the gas mileage dramatically.Hydrogen gas,instead of propane,should also work but you are doing something unique.Be careful.