Cruise control won't work?

My horn and/or Cruise Control won't work. Help?

• Ok, this is an ANSWER to the above question to anyone who has already checked or changed their clock spring, fuses, relays, horns or cruise control module and still have no horn or cruise. I went through every forum and ever step, replacing over $100 worth of parts. You know what it was?? The fricken ground to my aftermarket Viper alarm was loose! I checked the factory grounds in the beginning so I had ruled them out. I was about to bypass my wiring harness and run a seperate ground through my horn switch directly to the relay but while I was under the dash I noticed the alarm wires running behind the drivers side kick-panel. I popped it off and found the ground wire which was just screwed through the side of car next to the main wiring harness. The damned thing was loose. I took out the screw and ran it back in next to the old hole to make a fresh contact. I reached up and hit the horn and what do you know, the damned thing worked! All that trouble for a stupid aftermarket ground wire. CHECK YOUR GROUNDS!!! If you are having door lock, light, horn or even CC issues it may very well just be a bad ground other than the factory grounds. Hope this saves someone $$ and time. Thanks,

• Answer:

  People should just pick their *** up and just get it diagnosed, maybe someone you know could do it for free or someone who works at a service station at a garage, I get my car diagnosed sometimes for free like the situation you where in, that saves time and money too. Thanks for letting me know I will check that first thing if my cruise or horn isn't working right.