How write a good resume?

http://getinnanswers.angs.com.au A very informative website, kindly stay in website and check

Besides setting all margins to 1", the most important criteria for setting up a professional resume besides relevant text, is "scanability." Here are some helpful tips: 1. Place just below your identification header [your hame, address, phone, email address] any Conditional Warning Statement such as "Confidential Resume,"Do Not Contact Current Employer," etc. 2. Always fill-in an Objectives category [just below the Conditional Warning Statement] and make sure that he Objective will contribute to the profitability of your future employer; 3. Select a mono-type font such as Helvetica, Arial, Courier or Times Roman; do not select any cursive handwriting styles which cannot scanned; 4. Keep font sizes within a range of 10 to 12 pts.; 5. Avoid styling text with a justified alignment, keep it flushed left; 6. Instead of using tabs to set up blocked text entries, generate a table and use the column and row settings accordingly; 7. Do not place an i.d. picture anywhere on the resume, this is a major taboo due to discrimination issues; 8. Do not place any graphic text [saved as .gifs] onto the resume since it may be overlooked during the scanning phase; 9. List at the very end of the resume your interests which should include travel experiences, language skills, social interactions such as golf, team sports, tennis, etc. In conclusion, the above helpful hints were designed to allow ease of scanning of your resume into PDF which can then be text captured for seach purposes by your potential employer. If the original resume was created in Word, WordPerfect or Mac Appleworks, it can be Saved As a PDF file which then can be saved as an email attachment. Otherwise, you can simply use a scanner and scan a hard copy of the resume and then save as a PDF file. Failure to conform the resume to appropriate fonts and styles as outlined above will result in rejection of the resume simply due to the inability of the scanning device to properly index relevant resume entries. Good luck!

how do I write a great resume Resume of: john d Professional Objective: To apply my acquired skills toward challenging work with team oriented construction projects providing exceptional leadership, knowledge, safety, and above all providing systems that save lives. Employment History: 06/2008 – present Pasadena, Texas 77504 Service Technician III : Performing system services, including site wide plant upgrades for Bayer Chemical, BASF, Chevron Phillips Cedar Bayou, Oxy Vinyl’s, and Gregory Power Partners. System networking, start-up, programming, certifying, and commissioning with local A.H.J.’s 7/2007-06/08 San Marcos, Texas 78666 Service technician: Primary responsibilities included the servicing of secured gate entry system installations including expediting between other trades and ensuring a quality completed product. 5/2003-6/2007 Austin, Texas 78745 Project Superintendent: responsibilities included directing employees and other trades for effective installation of life safety and smoke control systems for commercial projects. Successfully completed projects include the Hilton Hotel, Austin City Lofts and Frost Bank Tower all in downtown Austin, Texas. 4/2001-4/2003 Austin, Texas 78723 Project Foreman: primary responsibilities included supervising the installation of FM200 Suppression Systems and Commercial Fire Alarm Systems. Worked hands on with the Sprinkler Division for installation of pre-action and dry systems. 1/94 –9/2001 Austin, Texas 78724 Project Foreman: primary responsibilities included supervising all aspects of new construction for industrial and commercial fire alarm installations. My industrial projects include but are not limited to; Semiconductor Fabs, Power plants, Chemical/refining facilities, Freezer plants, and toll roads. My commercial endeavors revolve Around high rise office buildings, hotels, courthouses, jails, and The site wide fire alarm Network at the Dell computer Round Rock Site. 5/92-1/94 St. Louis Missouri apprentice: primary responsibilities included building switchgear, setting gear, preparing and completing cable pulls for primary power distribution systems. Job Training: Currently licensed as Texas State Fire Alarm Technician. Completed OSHA certified contractor safety training. confined entry, Hazcom, Fall protection, H.S.T.C, I.S.T.C training, first aid, C.P.R., Clean room Protocal, lucent technologies fiber-optic terminations, and completed Notifier NU-2 analog fire panel course in Connecticut. Referances: Availible upon request. the margins are all screwed up cuz I imported it to this format use standard margins I removed most of my personnel info so set the margins like a typewriter hopefully you understand and above the dates is where my employer info was and after the resumeof: resume of:john doe 1313mockingbird lane hell, Texas 78666

Besides setting all margins to 1", the most important criteria for setting up a professional resume besides relevant text, is "scanability." Here are some helpful tips: 1. Place just below your identification header [your hame, address, phone, email address] any Conditional Warning Statement such as "Confidential Resume,"Do Not Contact Current Employer," etc. 2. Always fill-in an Objectives category [just below the Conditional Warning Statement] and make sure that he Objective will contribute to the profitability of your future employer; 3. Select a mono-type font such as Helvetica, Arial, Courier or Times Roman; do not select any cursive handwriting styles which cannot scanned; 4. Keep font sizes within a range of 10 to 12 pts.; 5. Avoid styling text with a justified alignment, keep it flushed left; 6. Instead of using tabs to set up blocked text entries, generate a table and use the column and row settings accordingly; 7. Do not place an i.d. picture anywhere on the resume, this is a major taboo due to discrimination issues; 8. Do not place any graphic text [saved as .gifs] onto the resume since it may be overlooked during the scanning phase; 9. List at the very end of the resume your interests which should include travel experiences, language skills, social interactions such as golf, team sports, tennis, etc. In conclusion, the above helpful hints were designed to allow ease of scanning of your resume into PDF which can then be text captured for seach purposes by your potential employer. If the original resume was created in Word, WordPerfect or Mac Appleworks, it can be Saved As a PDF file which then can be saved as an email attachment. Otherwise, you can simply use a scanner and scan a hard copy of the resume and then save as a PDF file. Failure to conform the resume to appropriate fonts and styles as outlined above will result in rejection of the resume simply due to the inability of the scanning device to properly index relevant resume entries. Good luck!

how do I write a great resume Resume of: john d Professional Objective: To apply my acquired skills toward challenging work with team oriented construction projects providing exceptional leadership, knowledge, safety, and above all providing systems that save lives. Employment History: 06/2008 – present Pasadena, Texas 77504 Service Technician III : Performing system services, including site wide plant upgrades for Bayer Chemical, BASF, Chevron Phillips Cedar Bayou, Oxy Vinyl’s, and Gregory Power Partners. System networking, start-up, programming, certifying, and commissioning with local A.H.J.’s 7/2007-06/08 San Marcos, Texas 78666 Service technician: Primary responsibilities included the servicing of secured gate entry system installations including expediting between other trades and ensuring a quality completed product. 5/2003-6/2007 Austin, Texas 78745 Project Superintendent: responsibilities included directing employees and other trades for effective installation of life safety and smoke control systems for commercial projects. Successfully completed projects include the Hilton Hotel, Austin City Lofts and Frost Bank Tower all in downtown Austin, Texas. 4/2001-4/2003 Austin, Texas 78723 Project Foreman: primary responsibilities included supervising the installation of FM200 Suppression Systems and Commercial Fire Alarm Systems. Worked hands on with the Sprinkler Division for installation of pre-action and dry systems. 1/94 –9/2001 Austin, Texas 78724 Project Foreman: primary responsibilities included supervising all aspects of new construction for industrial and commercial fire alarm installations. My industrial projects include but are not limited to; Semiconductor Fabs, Power plants, Chemical/refining facilities, Freezer plants, and toll roads. My commercial endeavors revolve Around high rise office buildings, hotels, courthouses, jails, and The site wide fire alarm Network at the Dell computer Round Rock Site. 5/92-1/94 St. Louis Missouri apprentice: primary responsibilities included building switchgear, setting gear, preparing and completing cable pulls for primary power distribution systems. Job Training: Currently licensed as Texas State Fire Alarm Technician. Completed OSHA certified contractor safety training. confined entry, Hazcom, Fall protection, H.S.T.C, I.S.T.C training, first aid, C.P.R., Clean room Protocal, lucent technologies fiber-optic terminations, and completed Notifier NU-2 analog fire panel course in Connecticut. Referances: Availible upon request. the margins are all screwed up cuz I imported it to this format use standard margins I removed most of my personnel info so set the margins like a typewriter hopefully you understand and above the dates is where my employer info was and after the resumeof: resume of:john doe 1313mockingbird lane hell, Texas 78666

you need to tell the company who you are, what jobs you have done in the past, what you are capable of doing

http://getinnanswers.angs.com.au A very informative website, kindly stay in website and check