What kind of amp do i need for my subs?
-
i have two 12" subs in one box and it is not ported They are sony xplods and this are there stats » 12" 4-ohm subwoofer » five-sided polypropylene cone with foamed rubber surround » power range: 90-380 watts RMS (1,300 watts peak power) » frequency response: 18-2,000 Hz » sensitivity: 89 dB I think i need a 400 or 500 watt amp but i want to be perfectly sure before i buy a new amp for them. Im Confused on if i have to add the 380w twice making 760w so i need a 800w amp? or if a 400 watt amp can power both at the same time comfortably Thank you for all answers!
-
Answer:
Since you have two 380 watt RMS subwoofers you want an amp that can push at least 760 watts. Also, your wiring with those subs will give you a 2 ohm load. http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2SVC_4-ohm_mono.jpg So look for a monoblock (single channel amp) that can push around that wattage at 2 ohms. I recommend hifonics, alpine, rockford fosgate, or kicker. Hifonics is best for a budget though. This amp is just about perfect, 750 watts RMS @ 2 ohms. This is what you want. http://www.sonicelectronix.com/item_43128_Hifonics-GLX1000.1D-1000W-RMS-Class-D-Monoblock-Gladiator-Series-Amplifier.html P.S. Don't get a 2 channel amp, they are less efficient and with your subwoofers you would get a 4 ohm load which would make them not as punchy and you would need a much bigger amplifier to give you 750 watts @ 4 ohms. Hope this helped good luck
IAnswerLongTime! at Yahoo! Answers Visit the source
Other answers
Since you have two 380 watt RMS subwoofers you want an amp that can push at least 760 watts. Also, your wiring with those subs will give you a 2 ohm load. http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2SVC_4-ohm_mono.jpg So look for a monoblock (single channel amp) that can push around that wattage at 2 ohms. I recommend hifonics, alpine, rockford fosgate, or kicker. Hifonics is best for a budget though. This amp is just about perfect, 750 watts RMS @ 2 ohms. This is what you want. http://www.sonicelectronix.com/item_43128_Hifonics-GLX1000.1D-1000W-RMS-Class-D-Monoblock-Gladiator-Series-Amplifier.html P.S. Don't get a 2 channel amp, they are less efficient and with your subwoofers you would get a 4 ohm load which would make them not as punchy and you would need a much bigger amplifier to give you 750 watts @ 4 ohms. Hope this helped good luck
BassHead
Related Q & A:
- What kind of amp should I use for a 15'' MTX 9500?Best solution by Yahoo! Answers
- What kind of amp would I need for these speakers to run optimally?Best solution by Yahoo! Answers
- What kind of amp should i get?Best solution by Yahoo! Answers
- What kind of amp should I get for my subs?Best solution by Yahoo! Answers
- What kind of amp would I need with these subs?Best solution by Yahoo! Answers
Just Added Q & A:
- How many active mobile subscribers are there in China?Best solution by Quora
- How to find the right vacation?Best solution by bookit.com
- How To Make Your Own Primer?Best solution by thekrazycouponlady.com
- How do you get the domain & range?Best solution by ChaCha
- How do you open pop up blockers?Best solution by Yahoo! Answers
For every problem there is a solution! Proved by Solucija.
-
Got an issue and looking for advice?
-
Ask Solucija to search every corner of the Web for help.
-
Get workable solutions and helpful tips in a moment.
Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.