what happens internally in a router when lan is configured?

When you ping the LAN IP address of the ISP router, what happens and why?

  • Answer:

    Depends, but lets just assume that router has a basic configuration. Ping sends an ICMP Echo Request packet directed to that target, in this case the ISP's router interface connected to your network. The router would then respond with a an ICMP Echo Reply. Alot of ISPs will disable echo replies on their interfaces to minimize risk of someone trying to do something mischievous. In which case your Echo Response goes unanswered, but you can still ping stuff past the interface on the Internet.

Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

Depends, but lets just assume that router has a basic configuration. Ping sends an ICMP Echo Request packet directed to that target, in this case the ISP's router interface connected to your network. The router would then respond with a an ICMP Echo Reply. Alot of ISPs will disable echo replies on their interfaces to minimize risk of someone trying to do something mischievous. In which case your Echo Response goes unanswered, but you can still ping stuff past the interface on the Internet.

Krowten Nimda

It overloads the server with packets. This causes the internet to run slower. This type of act is called DOS or DDOS. If you are doing it, I would recommend you do it on your own local network as this can get you in trouble with the law.

It sends the request to the router to check the connection between computers connected in LAN....The number of sent and received data (packets) is same and lost is 0 means your connection is Good ..Otherwise of the and sent data will not received there is not connection between the computers....why this PING need means...It helps to check the connection strength between the computers connected in LAN...You can check the ping for local LAN using the Start ->Run->command Prompt -> Ping ip address You can check ping for websites using the site http://www.whoisxy.com/ping.aspx

It sends the request to the router to check the connection between computers connected in LAN....The number of sent and received data (packets) is same and lost is 0 means your connection is Good ..Otherwise of the and sent data will not received there is not connection between the computers....why this PING need means...It helps to check the connection strength between the computers connected in LAN...You can check the ping for local LAN using the Start ->Run->command Prompt -> Ping ip address You can check ping for websites using the site http://www.whoisxy.com/ping.aspx

Nama

It overloads the server with packets. This causes the internet to run slower. This type of act is called DOS or DDOS. If you are doing it, I would recommend you do it on your own local network as this can get you in trouble with the law.

It's a secret

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.