How fast is a Ford Thunderbird LX 1993?

How do you replace the water pump on a 1993 Ford Thunderbird LX non-supercharged?

  • Answer:

    Disconnect the battery Drain the cooling system Remove the fan and clutch assembly from the water pump. You will need to get a fan clutch holding tool and a Fan Clutch Nut Wrench. Ford T84T-6312-C - Fan Clutch Holding Tool - Global Tool# 303-239 - OTC tool# 7204E1 Ford T84T-6312-D - Fan Clutch Nut Wrench - Global Tool# 303-240 - OTC Tool# 7204E2 After loosening the fan and clutch assembly from the water pump using the two tools listed above position the fan and clutch asembly in the fan shroud. THEN remove the fan shroud (which has the fan/clutch assembly in it) Loosen the water pump pully bolts Remove the drive belt by rotating the tensioner away from the belt by using pully retaining bolts only. (Do not pry on belt tensioner!) Remove the water pump pulley Disconnect the lower radiator hose, heater hose andwater pump bypass hose at the water pump. Unfasten the bolts that attach the pump to the cylinder front cover. Remove the pump and gasket.

wiki.answers.com Visit the source

Was this solution helpful to you?

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.