How do you replace the lighter in a 1999 Mercury Cougar?

How do you replace a lower front control arm bushing on a 1999 Mercury Cougar V6?

  • Answer:

    Go to AutoZone.com, They have on line repair manuals. The arm has two bolts to the frame and the ball joint has a pinch bolt to the steering knuckle. place a jack under the knuckle and jack it up a little, then pry ball joint out, unbolt frame bolts and pull it out. The bushings can now be replaced. I would replace the whole arm while its out, the ball joint is riveted in the frame Answer Go to AutoZone.com, They have on line repair manuals. The arm has two bolts to the frame and the ball joint has a pinch bolt to the steering knuckle. place a jack under the knuckle and jack it up a little, then pry ball joint out, unbolt frame bolts and pull it out. The bushings can now be replaced. I would replace the whole arm while its out, the ball joint is riveted in the frame

wiki.answers.com Visit the source

Was this solution helpful to you?

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.