How to remove stereo out of 2006 Ford Explorer?

How do you remove a factory stereo from a 2006 ford f 150?

• Answer:

  1) Open the cup holder/ash tray. 2) Reach underneath the trim plate and gently, but firmly pull both the left and right lower edges of the trim plate that cover the radio. Pull until the trim plate pops out. Don't worry it's fairly sturdy. (There are six clips on the trim plate. 2 on the bottom, 2 on the sides of the radio and 2 at the top.) 3) Press and disconnect the clip to the airbag light at top. 4) Remove any white plastic clips that may stay stuck on the dash and replace them on to the trim plate. You can use a flat head screw driver and a needle nose pliers to gently pull them out. 4) Pull the trim plate forward, so it's out of your way and let it hang from the wires. 5) Remove the four black screws holding the radio. 6) Remove the electrical connector on the back of the radio and pull out the antenna cable. You're now ready to install the replacement.