How to program a key fob on a 2000 cavalier?

How do you program a key fob on a 2000 corvette?

  • Answer:

    Programming Transmitters Turn the ignition to ON. Turn the radio to OFF. Press the RESET button in order to clear any IPC warning messages. Press and release the OPTIONS button on the DIC to scroll through the display options until the IPC display is blank. Press and hold the RESET button for 3 seconds. Press the OPTIONS button until FOB TRAINING message is displayed. Press the RESET button in order to begin the programming sequence. The message HOLD LK + UNLK 1ST FOB will be displayed. Simultaneously press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The IPC will indicate when that transmitter is programmed and when to proceed to the next. Repeat this procedure for each additional transmitter or press the OPTIONS button to exit.

wiki.answers.com Visit the source

Was this solution helpful to you?

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.