How to remove a bed off a ford ranger?

How do I remove the bed on a 93 ford ranger?/is the fuel tank mounted to the bed?

  • Answer:

    I easily lifted my step side 4x4 bed off with two people-- its more about balance than weight. Helps to have the tailgate off. There's only one wire harness to unplug for the taillights--piece of cake. You will have to unbolt the fuel filler neck though and it's easier to go back over the rear bumper if you have the rigid factory mud flaps off first. (if you have those)

PLWUWDQKX67YNZ7XUVB6PT3OJY at Yahoo! Answers Visit the source

Was this solution helpful to you?

Other answers

There are several large bolts that have to be removed.Make sure you heavily soak them with wd40 because they are gonna have a lot of rust on them.If you own one,I strongly recommend using a impact gun because these things are a bitc* sometimes.There are also numerous wiring harnesses to disconnect too.Its a straight forward process for the most part.You might need 4 people to lift it off of the frame.I know it takes 4 people to remove the cab because I have helped someone do that before

1wbrockstar2004

The fuel tank is mounted to the frame, but it is under the bed.

rick29148

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.