Dish network remote not working for receiver?

Dish Network Remote?

• I have dish network and one receiver which is in the main room. Tv2 remote was working just fine last night, but today I can't get it to turn my tv on. All the buttons light up on ...show more

• Answer:

  Amanda, what exactly do you have on the screen when you power on the TV? If you have a black, blue or snowy screen the TV may be on the wrong channel to receiver DISH Signal. (Tv 2's must be either on channel 60 or 73 in order to receive signal from the receiver) If when powering on the TV, you do have a DISH signal but the remote is not working for volume and to power on/off the Tv, it will need to be readdressed to the TV. I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]! You can look up codes if needed here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav 1.) Press and hold the clear TV button until all mode lights light up. 2.) Release and TV light will be blinking. 3.) Enter code and press #. The TV button should flash 3 times. 4.) Try functions (Volume, Power, etc..) and see if it is working. 5.) If no function, repeat steps 1-4 with another code. Once you have addressed the remote to the Tv, be sure to press the SAT button on the remote once. Kimberly.Escobar Social Media Representative DISH L.L.C